Pre-Engineered Construction

 

What makes our buildings so strong and durable?  At Stockade Buildings we have proven construction techniques we use to get the maximum strength out of each building component. We call this system the "TRAN - STRESS" design.  These proven techniques are included in each of our pre-engineered building systems.

 

 

 

A Standard Frame System:

Stockade’s Standard Frame "Tran - Stress" Structural System is designed for the industrial and agriculture market. This versatile system enjoys wide usage in manufacturing complexes, warehouse, recreational facilities and agriculture buildings, while providing outstanding value combined with great appearance and performance.

A Flush Frame System:

This pre-engineered system combines the advantages of the structural, Flush Frame "Tran - Stress" wall system with exceptional thermal capabilities for maximum energy conservation. Click the link above to read more about this system

Our Very own "Rafter S" System:

Stockade’s Rafter “S” Structural "Tran - Stress" System provides the flexibility of design and pre-engineered construction efficiencies required to satisfy your horse housing needs.

Other Construction Points of Interest:

What you should know about the Stockade Steel and Paint system!

Click the link above to read more details about what makes our buildings the best!  Engineering, Materials, and The Manufacturer. Read more about general points to consider as you design and purchase your building. The "Tran - Stress" Design System explained!

"Plan your building carefully, true savings are realized only if and when....your building serves your needs efficiently and completely."

What you should know about the Stockade Steel and Paint system!

General Specifications:

Read why our buildings are so strong and look so good! This Specification describes the top quality materials that make up each and every Stockade Building!

Click here to read other points to consider when selecting a builder

Download a Brochure on Other Points to Consider

View our Color Chart


Standard Frame Construction


Stockade’s Standard Frame Structural System is designed for the industrial and agriculture market. This versatile system enjoys wide usage in manufacturing complexes, warehouse, and recreational facilities and agriculture buildings, while providing outstanding value combined with great appearance and durability.

Standard Frame Column

2 x 6 / 2x 8 / 2 x 6

#1 Southern Yellow Pine, Glue and Nail Laminated

for Superior Strength!

Butt braced framing members are a key factor in the superiority of the trans-stress design. Equal distribution of the forces and stresses is obtained by bracing roof and wall framing members between the protruding center laminate of the column as in our standard frame buildings, or between the complete columns as with our Flush Frame Buildings and recessed between the trusses in all of our building systems. The entire butt end cross section of the member transmits stresses to wall columns and trusses, around the building. Nails are used to hold bracing in place...not for absorbing stress, as in other buildings. The strength built into your stockade building is obtained by utilizing the fiber strength of each member for positive bearing… rather than depending on nails for strength

The interior view of the Standard Frame Wall System with out Insulation, shows the 2 x 6 #2 Southern Yellow Pine Girts, standard on 32" centers.

Return to Top


Flush Frame Construction 


 

This pre-engineered system combines the advantages of the structural, Flush Frame wall system with exceptional thermal capabilities for maximum energy conservation. Of special interest to Owners, architects and engineers, the Flush Frame System allows for easy installation of the interior finishes and insulation.

Commercial Flush Frame Wall Column

2 x 6 / 2x 6 / 2 x 6

#1 Southern Yellow Pine, Glue and Nail Laminated

for Superior Strength!

 

Butt braced framing members are a key factor in the superiority of the trans-stress design. Equal distribution of the forces and stresses is obtained by bracing roof and wall framing members between the 3 ply laminated Flush Frame wall columns or between the truss. The entire butt end cross section of the member transmits stresses to wall columns and trusses, around the building. Nails are used to hold bracing in place...not for absorbing stress, as in other buildings. The strength built into your stockade building is obtained by utilizing the fiber strength of each member for positive bearing… rather than depending on nails for strength  

Optional Concrete Mount System

Return to Top


Rafter "S" System


Stockade’s Rafter “S” Structural System provides the flexibility of design and pre-engineered construction efficiencies required to satisfy your horse housing needs.

For the design of your private stable, riding arena or boarding facility, whatever your building needs, the Stockade Rafter “S” System will provide outstanding value combined with great appearance, safety and performance.

      

The Rafter “S” System provides for a clean, open interior allowing unobstructed air flow, needed for proper ventilation requirements.

Return to Top

Click Here for a Brochure on our Construction Practices

  

 

 Copyright Stockade Buildings Inc

1543 State Highway #91 Oran, Missouri. 63771

800-548-6765

Contact us

Custom | Industrial | Suburban | Commercial | Barns and Arenas | Construction |Stockade Story